Nouveauts - Page 3 - www.quebec4x4.com
www.quebec4x4.com  


Précédent   www.quebec4x4.com > Question et modification > Général

Réponse
 
Outils de la discussion Modes d'affichage
  #21  
Vieux 18/11/2007, 20h21
Avatar de xj91
xj91 xj91 est déconnecté
Administrateur
 
Date d'inscription: June 2004
Localisation: St-Antoine de Tilly
Messages: 9 944
Marque: Jeep
Envoyer un message via ICQ à xj91 Envoyer un message via MSN à xj91
A New Shorty GM SM465 to Jeep Dana 18/20 Adapter Kit

Nov 13, 2007
By:Press Release
Jeep at Off-Road.com


Advance Adapters hasn't fallen 'short' on this one - a new shorty GM SM465 to Jeep Dana 18/20 adapter kit. At 7/8” length, their adapter kit is the shortest on the market, providing a combined transmission-and-adapter length of only 12-7/8”.

They didn’t stop there.



Their adapter is manufacture from a Blanchard ground steel plate and features three transfer case clocking options. These clocking options are 20, 33, and 40 degree intervals. The clocking options will allow a fine-tune conversion to maximize clearance between the transmission and yoke.

To obtain the adapter length of 7/8” they had to manufacture a new SM465 main shaft. This new main shaft fits 6 spline drive gears only.
__________________
Ram 2500 05 5.9L CRD 6vit
LJ 05 L6 SC 6spd Atlas IV 37 MTR/K Warn 8274



To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Réponse avec citation Réponse rapide à ce message
Sponsored Links
Advertisement
 
  #22  
Vieux 11/12/2007, 19h08
Avatar de xj91
xj91 xj91 est déconnecté
Administrateur
 
Date d'inscription: June 2004
Localisation: St-Antoine de Tilly
Messages: 9 944
Marque: Jeep
Envoyer un message via ICQ à xj91 Envoyer un message via MSN à xj91
The WARN Wireless Control System lets you
operate your truck's winch remotely from
up to 100' away. The system will work with
any WARN winch with a 5-wire electrical
system.

The system is easy to install and a cinch to use. For
easy installation, the Wireless Control System comes
with a receiver with an internal antenna, and all of the
necessary mounting hardware. The receiver is potted for
extreme resistance to water and the elements. The
weather-proof transmitter has two large buttons that make it
easy to operate, even while wearing gloves, and its two-color LED provides operator feedback.

When installed, the system is simple to operate. To begin activation, hold down both buttons on the transmitter for five seconds until the two-color LED turns green. This indicates the system has been activated. To begin the winching process, hold down the power-in or power-out buttons, and the LED will turn red, showing that winching is in process. The LED will blink if the transmitter's battery is low. System automatically turns off to conserve battery life.

With the WARN Wireless Control System, you can now operate your winch with no strings (or wires) attached.

PN 76080 Wireless Control System for WARN Truck/SUV winches

http://warn.com/truck/accessories/wi..._control.shtml
__________________
Ram 2500 05 5.9L CRD 6vit
LJ 05 L6 SC 6spd Atlas IV 37 MTR/K Warn 8274



To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Réponse avec citation Réponse rapide à ce message
  #23  
Vieux 11/12/2007, 19h08
Avatar de xj91
xj91 xj91 est déconnecté
Administrateur
 
Date d'inscription: June 2004
Localisation: St-Antoine de Tilly
Messages: 9 944
Marque: Jeep
Envoyer un message via ICQ à xj91 Envoyer un message via MSN à xj91
New KC-pod, 70 Watt HID Carbon Fiber Light
Dec 11, 2007
By:Press Release

KC HiLiTES, Inc. continues to set new standards in automotive lighting with the introduction of their new KC-pod. This is the industry’s first 70 watt HID light.

Designed by KC engineers in conjunction with critical feedback from some of the nation’s top off-road racers, the KC-pod features a unique weight saving Carbon Fiber housing. The 70 watt HID bulb and computer designed Multi-Surface Reflector are protected by an Unbreakable Hard Coated Lexan Lens. The 7.25” Carbon Fiber housing is Fixed Mounted for extreme stability. The Spring Loaded Lens Assembly not only isolates it from the harsh impacts of off-road racing, but also allows for fast, simple and accurate aiming. An External Ballast is attached directly to the light housing to provide easier wiring.



The first extreme test of the new KC-pod took place at the 2007 Baja 1000. Mounted atop of the KC/Donahoe Racing/Nitto Tire Toyota FJ Cruiser, the lights were turned on at the start in Ensenada to finish in Los Cabos, B.C. Racing over nearly 1300 miles of the most treacherous terrain the Baja peninsula has to offer and more than 41 hours of continuous operation, the lights performed flawlessly as a true testament to their durable performance.

At the 2007 SEMA Show, the new KC-pod was awarded the “Global Media Award” by a prestigious jury comprised of 50 leading international journalists who reviewed over 2,000 products. The judges were asked to evaluate products that they felt would be well received by consumers and fill a niche in their respective countries. As editors in the international automotive industry, their opinions and expertise are highly regarded.

KC’s new KC-pod is available in both Long Range and Driving beam patterns. For more information, please contact:

KC HiLiTES
2843 West Avenida De Luces
Williams, AZ 86046
(928) 635-2607
www.kchilites.com
__________________
Ram 2500 05 5.9L CRD 6vit
LJ 05 L6 SC 6spd Atlas IV 37 MTR/K Warn 8274



To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Réponse avec citation Réponse rapide à ce message
 
  #24  
Vieux 11/12/2007, 19h09
Avatar de xj91
xj91 xj91 est déconnecté
Administrateur
 
Date d'inscription: June 2004
Localisation: St-Antoine de Tilly
Messages: 9 944
Marque: Jeep
Envoyer un message via ICQ à xj91 Envoyer un message via MSN à xj91
Newly Redesigned 6" Suspension Lift for 88-98 1500 Chevy 4WD

Dec 11, 2007
By:Press Release
Chevy at Off-Road.com


Dyersburg, TN – Rough Country is proud to release the new 4-6” lift kits for 88-98 GM 1/2 ton Pickup, Tahoe, Suburban and Yukon. Rough Country is constantly striving for easier installations and this newly revised kit is an installers dream.

The kit is all inclusive with E-Z fit front and rear cross members, durable differential drop brackets, drop torsion bar brackets, which include a laser cut Rough Country RCX logo, new kicker braces and E-Z to install upper & lower control arm drops. There are no more “jigsaw" brackets to attach to each other, which allows for a quick and easy professional installation time of 6-8 hours. This kit also includes a massive steering link, coupled with a heim joint assist link to allow your steering to flow both on road and off. It’s topped off with Rough Country's off road proven front and lower skid plates, which also include RCX laser cut logos.

Assembled with durable plate steel meticulously welded, the new Rough Country 4-6” kit was built not only to stand the test of time, but also to perform when you need it the most. You cannot go wrong with the quality, craftsmanship and simplicity this kit has to offer.

For more information on the new 88-98 4wd Chevy 1500 suspension lift, please contact Rough Country Suspension Products at http://www.roughcountry.com or call 800-222-7023. You may also contact Rough Country to find an authorized Rough Country dealer near you, or visit the “Dealer Locator” link at http://www.roughcountry.com.
__________________
Ram 2500 05 5.9L CRD 6vit
LJ 05 L6 SC 6spd Atlas IV 37 MTR/K Warn 8274



To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Réponse avec citation Réponse rapide à ce message
  #25  
Vieux 11/12/2007, 19h10
Avatar de xj91
xj91 xj91 est déconnecté
Administrateur
 
Date d'inscription: June 2004
Localisation: St-Antoine de Tilly
Messages: 9 944
Marque: Jeep
Envoyer un message via ICQ à xj91 Envoyer un message via MSN à xj91
Rear Toyota Rock-Assault Axle Housings

Dec 11, 2007
By:Press Release
Toyota at Off-Road.com


Trail-Gear, Inc. introduces a new concept to axle housing design. This exclusive design features axle tubes that have been offset above the housing centerline. The inner axles ride near the bottom of the axle tubes rather than in the center. The results are an increase of 3/8" ground clearance under the axle tubing. Axle tubes are made from ¼” thick DOM tubing.



The heavy-duty, press formed, 1/4" plate steel center section shell is specially shaped to ensure a minimum of 3/4" additional clearance under the differential. The differential mounting surface is made from ½” plate steel to ensure studs can not pull out, even under heavy loads. The outer offset flanges are made from 4130 Chromoly to prevent distortion or bending. Housings are precision alignment checked using start-of-the-art, 3D digital imaging equipment.

The Rock-Assault axle housings use stock or aftermarket 1986-1995 Toyota Pickup/4Runner axle shafts. An optional fill / inspection cap can be installed for an additional fee. Additional lengths as well as front applications will be available soon.

Contact Info:

Trail-Gear-Inc.
(877) 4X4-TOYS
(559) 252-4950
5356 E Pine Ave
Fresno, CA 93727
www.Trail-Gear.com
__________________
Ram 2500 05 5.9L CRD 6vit
LJ 05 L6 SC 6spd Atlas IV 37 MTR/K Warn 8274



To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Réponse avec citation Réponse rapide à ce message
  #26  
Vieux 11/12/2007, 19h13
Avatar de xj91
xj91 xj91 est déconnecté
Administrateur
 
Date d'inscription: June 2004
Localisation: St-Antoine de Tilly
Messages: 9 944
Marque: Jeep
Envoyer un message via ICQ à xj91 Envoyer un message via MSN à xj91
ARB Rock Sliders Now Available

Nov 26, 2007
By:Press Release
Jeep at Off-Road.com


ARB 4x4 Accessories, an Australian-based four-wheel parts manufacturer, is proud to announce another great product for the newly released Jeep Wrangler JK. ARB is world-renowned for engineering and manufacturing near indestructable body protection equipment.



Made from .25" thick 2.4" OD Australian 250 Grade mild steel tubing, the internal mandrel bent Rock Sliders are designed to be a simple bolt-on protection solution for the JK's body. The ARB Rock Sliders attach entirely to factory-drilled holes in the chassis provides you the strongest mount possible and by utilizing the rear lower control arm hanger as a mounting location the Rock Sliders will also strengthen both the chassis and rear suspension system for improved off-road use.

For more information, visit www.arbusa.com
__________________
Ram 2500 05 5.9L CRD 6vit
LJ 05 L6 SC 6spd Atlas IV 37 MTR/K Warn 8274



To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Réponse avec citation Réponse rapide à ce message
  #27  
Vieux 16/01/2008, 01h04
Avatar de Peebb
Peebb Peebb est déconnecté
Membre régulier
 
Date d'inscription: January 2008
Localisation: Gaspé
Messages: 33
Marque: Jeep
Envoyer un message via MSN à Peebb
Très bbeau forum XJ91 lache pas continue !!!!!
__________________
Jeep TJ sahara 2000
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

Dana 35 pas diable
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

33-13.5*15 LTB sur roue 15*10
lift kit 3pouce , body 1 pouce
Réponse avec citation Réponse rapide à ce message
  #28  
Vieux 10/02/2008, 13h46
Avatar de xj91
xj91 xj91 est déconnecté
Administrateur
 
Date d'inscription: June 2004
Localisation: St-Antoine de Tilly
Messages: 9 944
Marque: Jeep
Envoyer un message via ICQ à xj91 Envoyer un message via MSN à xj91
Advanced Clutch Technology (ACT) has released a new high performance clutch kit for the 01-03 Dodge 5.9 Cummins Diesel & 94-03 Dodge Ram 8.1 and 8.3L. ACT’s new clutch kit for the Dodge trucks feature a Heavy Duty Pressure Plate that incorporates hardened diaphragm fingers for decreased wear and provides a 38% increase in clamp force over the stock unit.



This ACT Clutch Kit combines the Heavy Duty Pressure Plate and a Performance Organic Disc, a disc that features special performance organic friction materials to withstand increased heat and abuse, steel backed linings for high burst strength and modifications engineered for quicker shifting.

The ACT Clutch Kit provides a moderate and consistent pedal feel, smooth engagement, significantly improved durability and increasesthe torque capacity to 993 ft. lbs.

ACT clutches deliver the maximum holding power by applying a series of sound engineering advancements to new (not rebuilt) components which maximizes load and reduces flex. The result is maximum torque capacity, long life and clean, fast shifting. ACT is a premier clutch manufacturer that has more than 300 different applications and more than 500 performance clutch kits. The company’s product line features clutches and forged flywheels for the most popular vehicles in the sport compact car market. ACT is headquartered in Lancaster, California.

advancedclutch.com
__________________
Ram 2500 05 5.9L CRD 6vit
LJ 05 L6 SC 6spd Atlas IV 37 MTR/K Warn 8274



To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Réponse avec citation Réponse rapide à ce message
  #29  
Vieux 10/02/2008, 13h48
Avatar de xj91
xj91 xj91 est déconnecté
Administrateur
 
Date d'inscription: June 2004
Localisation: St-Antoine de Tilly
Messages: 9 944
Marque: Jeep
Envoyer un message via ICQ à xj91 Envoyer un message via MSN à xj91
ARB Snatch Block 9000

Renton, WA - Those that regularly head off the beaten track know how essential it is to be prepared for a recovery situation. A snatch block is an incredibly useful piece of recovery equipment that enables you to retrieve loads that are double a winch’s capacity by reducing the load on the winch by half. To add to ARB’s range of snatch blocks and recovery equipment, an innovative new snatch block for both off road and competition use has just been released.

Designed in Australia by ARB engineers, the Snatch Block 9000 features a revolutionary, computer optimised two-piece polymer pulley design for increased functionality and safety during a vehicle recovery. Tested to withstand the extremes of off-road competition winching, the snatch block features rounded safety edges to protect against pinch points during recovery situations, and also allows for easy one-handed loading and unloading of the cable or rope. The working load encountered during winching also has a positive effect on the snatch block by causing the plates to press together for extra support.

Suitable for use with bow shackle sizes up to 8.5 ton, the snatch block features high strength, low density materials which reduce the total weight of the block by up to 50% over other comparable rated snatch blocks. The design includes self-righting plates to eliminate the need to correctly position the block while introducing cable tension, while the inner pulley is made from self lubricating crystalline polymer to enable operation under high loads without the need for lubrication.

These new snatch blocks are currently in stock and can be purchased through any ARB distributor throughout the United States and Canada, along with a variety of recovery gear for all recreational and competition 4WDing uses. For more details of ARB’s extensive range of 4x4 equipment including protection gear, Air Lockers and suspension, please contact them.

Specifications:
working load: 19,800lb
breaking strength: 38,500lb
side plate material: 1/5" cold rolled steel
pulley material: specialized polymer
pulley diameter: 4 1/3"
cable size: 1/3" - 1/2"
weight: 5.3lb
greasable: not required
manufactured from high strength, low density materials, the 19,800lb snatch block is strong but lightweight, making it ideal for competition purposes.
__________________
Ram 2500 05 5.9L CRD 6vit
LJ 05 L6 SC 6spd Atlas IV 37 MTR/K Warn 8274



To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Réponse avec citation Réponse rapide à ce message
  #30  
Vieux 10/02/2008, 13h49
Avatar de xj91
xj91 xj91 est déconnecté
Administrateur
 
Date d'inscription: June 2004
Localisation: St-Antoine de Tilly
Messages: 9 944
Marque: Jeep
Envoyer un message via ICQ à xj91 Envoyer un message via MSN à xj91
Phoenix, AZ - Daystar is pleased to offer their newest combo kit for the Jeep JK Wrangler, KJ09143BK. This new part number combines Daystar's 1" body mount kit with their 1 3/4" lift kit. The combo kit provides room for up to 35" tall tires while maintaing factory ride quality.

2007-2008 Jeep JK Wrangler 2WD & 4WD 1" Body Mount Kit
- Easy installation/no welding/no drilling
- Maintains factory ride
- All hardware is included
- 1 inch Urethane body mounts easily install between the factory body mounts and frame, keeping the body accurately centered on the frame.

2007-2008 Jeep JK Wrangler 2WD & 4WD 1 3/4" Front & Rear Leveling Kit
- Easy installation/no welding/no drilling
- Maintains factory ride
- All hardware is included
- Top-loading coil spacer, no disassembly of the stock coil required.
__________________
Ram 2500 05 5.9L CRD 6vit
LJ 05 L6 SC 6spd Atlas IV 37 MTR/K Warn 8274



To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Réponse avec citation Réponse rapide à ce message
Réponse

Réponse rapide
Message:
Options

Register Now

Pour être autorisé à envoyer des messages sur le forum www.quebec4x4.com, vous devez être inscrit.
Veuillez indiquer le nom que vous souhaitez utiliser, votre adresse électronique et les informations obligatoires mentionnées dans le formulaire ci-dessous.
Identifiant:
Mot de passe
Veuillez insérer un mot de passe pour votre compte utilisateur. Remarquez que les mots de passe sont sensibles à la casse.
Mot de passe:
Confirmez votre mot de passe:
Adresse email
Veuillez insérer une adresse email valide.
Adresse email:
Localisation
Ou habitez vous
Dix+ 2 = ?
entrer la reponse a cette question (Mesure contre les spam)
Insurance
Please select your insurance company (Optional)

Log-in


Outils de la discussion
Modes d'affichage

Règles de messages
Vous pouvez créer de nouvelles discussions
Vous pouvez envoyer des réponses
Vous ne pouvez pas envoyer des pièces jointes
Vous ne pouvez pas modifier vos messages

Les balises BB sont activées : oui
Les smileys sont activés : oui
La balise [IMG] est activée : oui
Le code HTML peut être employé : non

Navigation rapide


Fuseau horaire GMT -4. Il est actuellement 03h11.


Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
Version française #21 par l'association vBulletin francophone
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.