Nouveaut�s

[GR Suspension]

Ansani Designs Introduces Ford Super Duty Fiberglass Light Truck Bumper
Publish date: Apr 16, 2010
By: Press Release
Source: Trucks at Off-Road.comTempe, AZ - Ansani Designs offers a fiberglass high-visibility bumper with molded-in light pods for 2008-current Ford Super Dutys. This complete direct-replacement bumper is 40%-50% lighter than the OE steel unit. Ansani's innovative design incorporates mounting pods for three KC Rally 800 8-inch auxiliary lights. Bumpers are shipped primer-ready; custom hydro-printed finishes are optional. Other applications are available for late-model Chevy and Toyota fullsize pickups.

For more information, contact Ansani Designs, 480-323-0504, [email protected], www.ansanidesigns.com.

[GR Suspension]

Superlift Releases 2″, 4″ and 6″ Lifts for 2010 Dodge Ram HD Pickups


By woody
Tuesday, May 11th, 2010
Superlift, an industry leader in Dodge lift systems, is now shipping 2010 Ram 2500/3500 4×4 applications. Offerings begin with a mild 2″ Level-It kit — front coil spacers that clear 33″ tires. Moving up, Superlift’s 4″ and 6″ lift kits both have replacement coil springs (different rates for Hemi and Cummins applications), upper and lower link arms, a track bar bracket, and rear leveling blocks. The 6″ kit (shown), which fits 37s, super-sizes the appropriate components and adds a transmission drop bracket as needed.
Numerous options include swiveling Rockrunner link arms for optimal ride and handling, Superlift SS monotube shocks by Bilstein, dual shock mounts, dual steering stabilizers (hydraulic Superide or gas-charged Bilstein), carrier-bearing shims, a transfer case indexing ring, Bulletproof braided steel brake hoses, traction bars, TruSpeed speed sensor calibrator, and eXtreme Ring differential protectors.
For more information, contact Superlift Suspension Systems, 800-551-4955, www.superlift.com.

[GR Suspension]

IPF PERFORMANCE HEADLAMP REPLACEMENTS


By woody · Comments (0)
Friday, May 7th, 2010
At ARB’s request, IPF Performance Lighting developed the a replacement headlamp kit to improve the lighting performance and beam pattern over the original equipment head lights for the Jeep Wrangler JK (2007-2010).

[GR Suspension]

2007+ JEEP WRANGLER JK RUBICON 35 SPLINE ARB AIR LOCKER


By woody
Thursday, June 3rd, 2010
To meet the demand of off-roaders looking to strengthen their current axles without going to the expense and weight penalties of a larger axle assembly, ARB has just released the latest model in their Performance Air Locker Series. Designed for the new 2007 and newer Jeep Wrangler JK Rubicon Dana 44 housings, this new performance ARB Air Locker allows users to gain the axle strength they need from larger aftermarket 35 spline shafts and still retain their smaller, lighter Dana 44 assemblies.
Referred to as ARB part number RD157, this new Air Locker is designed to be installed with aftermarket 35 spline axle shafts which improve the torque range by about 30% over the stock 32 spline shafts that come installed in the JK Rubicon Dana 44. As with other ARB Air Locker models, the RD157 features ARB’s patented “timed” locking mechanism that optimizes the Air Locker’s internal gear mesh in the locked configuration and increases the unlocking speed all at the touch of a dash mounted switch. Complete with the proven steel reinforced, elastomer bonded annular seal, this Air Locker is designed to handle the most extreme climatic temperatures on earth.
Using the very latest in parametric solid modeling systems and analysis packages, ARB’s engineering team was able to perform comprehensive, live and virtual testing to develop a most impressive final product. The 35 spline, JK Wrangler Rubicon Dana 44 Air Locker is available through any ARB retailer by ordering ARB part number RD157.
Retail - $984.94

• Aftermarket 35 spline shafts required
• Will work with JK Rubicon Dana 44 housings ONLY
• Will work with JK Rubicon Dana 44 gears ONLY

[GR Suspension]

NEW DUAL FRICTION CLUTCH ASSEMBLY FOR 2000-2004 NISSAN XTERRA AND 2004 NISSAN FRONTIER SUPERCHARGED 3.3L VG33ER ENGINE


By woody
Thursday, June 3rd, 2010
Centerforce® is proud to introduce this New Dual Friction clutch assembly for the 2000-2004 Nissan Xterra and 2004 Nissan Frontier with the supercharged 3.3L VG33ER Engine. This new clutch assembly replaces the stock pressure plate with a more reliable assembly with a higher holding capacity that is designed as a direct bolt in for perfect fit and function. Centerforce strives to provide the best products on the market at any performance level by using patented processes and constantly testing different materials and designs to find the best combination. This new application is now available as a Dual Friction® clutch assembly for use in high torque performance applications. The Dual Friction part number is DF633500 (Pressure Plate and Disc Included). Also available is the Centerforce II assembly as part number CFT633500 (Pressure Plate and Disc Included).

ITEMTYPEDESCRIPTIONCFT633500CENTERFORCE II CLUTCH PRESSURE PLATE AND DISC00-04, NISSAN, FRONTIER–XTERRADF633500DUAL FRICTION CLUTCH PRESSURE PLATE AND DISC00-04, NISSAN, FRONTIER–XTERRAA division of Midway Industries, Inc., Centerforce® is proud to be recognized as the leading manufacturer of performance clutch and pressure plate systems in the United States. Centerforce has over 1700 different non-asbestos clutch/pressure plate applications available to the automotive enthusiast. Continuous development and improvement of product offerings is reflected in the unique features of the Centerforce clutch line which is protected under nine (9) separate U.S. patents. With headquarters located in Prescott, Arizona, Midway Industries and Centerforce are proud to be a three-generation family owned business that’s committed to designing and manufacturing the highest quality and most innovative products available. Centerforce clutch systems are the performance enthusiast’s first choice and can be found on leading OEM and customized vehicles worldwide. For more information, contact Centerforce directly at 928/771-8422, go to www.centerforce.com or visit your local Centerforce dealer.

[GR Suspension]

New ARB Air Locker Annoucement – Toyota 4Runner and Prado

By woody
Thursday, June 3rd, 2010

Seattle, June 3/ ARB 4×4 Accessories/ — Just released by ARB, a new rear ARB Air locker to suit the new generation Toyota 4Runner (2010+) and Toyota Prado 150 (2009+). With the vehicle updates, Toyota also decided improve the already proven Toyota 8″ axle that has been in service since the 70’s. Luckily ARB Air Locker engineering had access to the new axle early on and was able to develop a product in short time.
This new Air Locker application (RD193) is sure to prove popular among 4Runner/Prado four-wheel drive owners looking to equip their vehicle for their next adventure, with the ultimate on-demand traction device. In addition to providing outright improvements to a vehicle’s off road capabilities, an Air Locker will allow a vehicle to be driven in a more controlled manner, thus reducing the likelihood of environmental and vehicular damage.
The attraction of an ARB Air Locker lies in the fact that this full carrier replacement differential gives the best of both worlds… a normal open differential for on road use, and a 100% locked-up differential for challenging off road situations. ARB Air Lockers utilize a 12-volt compressor that delivers high-pressure air to the differential center, thereby engaging the locking mechanism. With both wheels tied directly to the rotation of the ring gear, the vehicle maintains maximum traction when the Air Locker is activated.
Sold throughout the world, ARB Air Locker’s patented design has proven ultra reliable, even under the most extreme conditions with structural components manufactured from aerospace grade alloy steels. Already strengthening the range of Toyota 4Runner/Prado accessories (including ARB bumpers, roof racks and suspension systems), the RD193 is set to prove itself among new generation Toyota 4Runner/Prado owners.

[GR Suspension]

Extreme Outback Offers Submersible Air Compressor


By woody
Tuesday, June 1st, 2010
Vacaville, CA – Extreme Outback Products goes off the deep end with its new ExtremeAire Triton. Believed to be the world’s first submersible continuous-duty electric compressor, the fully sealed Triton has a 100-percent duty cycle. Crucial components include a 1.5-horsepower fan-cooled motor and other parts shared with Extreme Outback’s “normal” ExtremeAire Magnum compressor: permanently lubed and sealed bearings, heat-dissipating cylinder coating and stainless steel hardware.
The ExtremeAire Triton can be mounted in any position. It’s ideal for off-road, RV, agricultural, military, construction and motorsports support: Uses include tire and air-suspension inflation, powering pneumatic tools, and actuating Air Lockers and train horns. Working pressure is 150 psi (80-amp draw). Dimensions are 16 x 6 x 9 inches, weight is 21 pounds. 12- and 24-volt models are available, and Extreme Outback offers an extensive line of installation kits and pneumatic accessories. The ExtremeAire Triton won a Global Media Best New Product award at the 2009 SEMA trade show.
For more information, please contact Extreme Outback Products, 866-447-7711, [email protected], www.extremeoutback.com.

[GR Suspension]

Superlift Offers Dual Steering Stabilizers For 2009-2010 Dodge Ram HD Pickups
Publish date: Jun 3, 2010
By: Press Release
Source: Trucks at Off-Road.com

#htmlarticlebody DIV { DISPLAY: none}#htmlarticlebody #page1 { DISPLAY: block}West Monroe, LA - Superlift helps keep late-model Dodge pickups on the straight and narrow with dual steering stabilizer kits. These systems fit 2008-2010 Dodge Ram 2500 and 3500 4x4 trucks manufactured on or after 3/1/08. On that date, the factory changed the steering linkage from "inverted Y" to "cross car." This eliminated the tie-rod-to-draglink connection, substituting a full-length (knuckle-to-knuckle) tie-rod instead. Two kits are offered: #92708 includes brackets, mounting hardware, and base Superlift Superide white twin-tube cylinders. Kit #92709 upgrades with Superide SS silver-zinc monotube cylinders, now manufactured exclusively by Bilstein.
For 2003-2008 Dodge Ram HD trucks, Superlift offers dual-stabilizer kits in both white Superide cylinders (#92670) and Superide SS silver-zinc monotubes (#92700). Pre-2009 Ram HD owners who are up-fitting to the new steering setup and who already have the Superlift inverted-Y dual-stabilizer system can update with a bracket-only kit (#92707).
For more information, contact Superlift Suspension Systems, 800-551-4955, www.superlift.com.

[xj91]

Warn

NEW! Dual Battery Control Kit

NEW! DUAL BATTERY CONTROL KIT

Lets you use two batteries, but saves the main battery for essential functions, such as starting the vehicle.

Engineered specifically to give maximum power during winch power-in operation.

For use with 12-volt accessories such as winches, lights, stereos and more.

Minimizes charging system overload; if both batteries need charging, the main battery is charged first.

Optional manual override forces a parallel connection when you need extra power for charging a weak battery or jump-starting another vehicle.

Designed for use with 12-volt DC magneto or alternator charging systems.

Easy to install; includes all necessary hardware. (Second battery not included)

[GR Suspension]

aFe Releases New Fuel Filter for 2001-10 Mm Duramax V8



Jun. 15, 2010 By Press Release

• Email
• Print
• Discuss

Corona, Ca … advanced FLOW engineering (aFe), an industry leader in performance intakes, filters, manifolds, intercoolers and exhaust systems is pleased to announce the release of their new Pro Guard D2 performance fuel filter for the 2001-2010 GM Duramax with the V8-6.6L. This new Pro Guard D2 performance fuel filter provides maximum protection and flow for your Duramax. 44-FF011 exceeds the new GM specifications with a 4-micron rating. This performance spin-on fuel filter uses a 3/8”-8 center thread and has a maximum working pressure of 30psi with a maximum flow rate of 50gph. 44-FF011 has a water removal efficiency of 99% and has been proven in the harshest environments with operating temperatures between -50 degrees Fahrenheit to +225% degrees Fahrenheit. This filter is as durable as your Duramax.
Part Number 44-FF011 retails for around $59.95 and is available in stores now.
For more information on this or any other aFe product, please visit our website at http://www.afepower.com/ or contact our Power Professionals at 1-951-493-7155.