NPA Header Image
Skid Plates - Under Vehicle Protection
2012 On Jeep JK Wrangler (3.6 liter Petrol)
Early November 2013
Under Vehicle Skid Plates - 2012 On Jeep Wrangler JK
As the first solid axle model vehicle ARB Engineers tackled for skid plates, the Jeep Wrangler JK presented many new issues that needed to be overcome. Among those, the skid plates panel had to mount in such a way that it allowed full movement of the front axle and all of its locating components during suspension cycling. Next it had to allow for the many different suspension systems and aftermarket control arms available on the market for this popular vehicle.
Being the longest skid plate panel manufactured so far, this panel is designed to virtually cradle the entire engine oil pan on all sides, providing the maximum amount of protection while still allowing access to the engine oil drain plug.
Toward the rear of the panel the surface area was kept as narrow as possible so as to allow for the fitment of aftermarket long arm kits.
To support the panel, a new cross-member has been developed that bolts between the two engine mounts. Special attention had to be paid to the design to allow the front suspension control arms to travel up fully (under suspension compression) in an area that was very compact and didn't allow a lot of freedom in design.
In addition to engine oil pan and transmission protection, the Jeep also has a vulnerable charcoal canister (part of the vehicle emissions system) that hangs low towards the rear of the vehicle for which a separate skid plate panel has been developed.
Note: Skid plates are designed for the 2012 On 3.6 liter models. For 2007-11 models with the 3.8 liter, refer to part number 5450100
Find us on Facebook Follow us on Twitter
ARB Corporation Limited is Australia's largest and industry leading manufacturer and distributor of quality, 4WD vehicle accessories, with distribution in more than 100 countries worldwide. The company manufactures and stocks the world's most respected and sought after brands including ARB Air Locker locking differentials and bumpers; Old Man Emu (OME) customized suspension systems, IPF high performance lighting, and Safari snorkel systems. ARB's Seattle office is the North, South & Central American headquarters and importer of ARB 4x4 Accessories.
For more information about ARB or to obtain production quality images please contact:
ARB Marketing, ARB 4x4 Accessories 720 SW 34th Street, Renton, WA 98057
Tel: (425) 264-1391 | Fax: (425) 264-1392 | [email protected]
Ram 2500 05 5.9L CRD 6vit
LJ 05 L6 SC 6spd Atlas IV 37 MTR/K Warn 8274
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
|Outils de la discussion|